Category: Flux Core Welding

E71T-11 | Flux Core Welding Wire | WeldingCity.com

E71T-11 DATA SHEET

— CHARACTERISTICS:

  • Very smooth arc
  • Exceptionally low spatter.
  • Minimizes burn through.
  • Fast freezing slag facilitates welding.
  • Uses DCEN polarity.

— SHIELDING GAS: Self shielded
— WELDING POSITIONS: All positions
— DIAMETERS: 0.030″ , 0.035″
— TYPICAL DEPOSIT COMPOSITION:

  • Aluminum (Al) 1.50
  • Carbon (C) 0.21
  • Manganese (Mn) 0.30
  • Phosphorous (P) 0.01
  • Silicon (Si) 0.15
  • Sulfur (S) 0.01

— TYPICAL MECHANICAL PROPERTIES:

  • Ultimate Tensile Strength (psi) 89,400 psi
  • Yield Strength (psi) 66,600 psi
  • Percent Elongation 23%

The above is a basic data sheet of Flux Core Welding Wire E71T-11. We have E71T-11 in stock both in 2-lb spools and 11-lb spools. The size range from 0.030″, to 0.035″

e71t flux core welding e 71t-11
e71t flux core welding e 71t-11

Flux Core Welding Wires – One of My Favorite MIG Welding Wires

flux core welding wires

Today I am going to talk about Flux Core Welding Wires. We have them in our stock as E71T-GS and E71T-11.

Flux Cored Arc Welding was first developed in the early 1950s as an alternative to shielded metal arc welding. The advantages of using Flux Cored Arc Welding Wires will be portability, stability, and flexibility of working environments.

Flux-cored arc welding may be a semi-automatic or automatic arc welding method. Flux Cored Arc Welding needs a continuously-fed expendable hollow conductor containing a flux and a constant-voltage or, less normally, a constant-current fastening power provide. Associate in Nursing outwardly provided shielding gas is typically used, however usually the flux itself is relied upon to get the mandatory protection from the atmosphere, manufacturing each evaporated protection and liquid dross protective the weld. the method is wide utilized in construction attributable to its high welding speed and portability.

flux cored welding

One type of Flux Cored Arc Welding requires no shielding gas. This is often created attainable by the flux core in the tubular consumable electrode. However, this core contains more than just flux, it also contains various ingredients that when exposed to the high temperatures of welding generate a shielding gas for protecting the arc. This type of Flux Cored Arc Welding is attractive because it is portable and generally has good penetration into the base metal. Also, windy conditions need not be considered.

To buy this welding wire, please visit our store front for Flux Core Wires for more information.